5 Foot Finish Mower Cat. I 3pt 16+HP Rating (FH-FM150)

The Farmer-Helper finishing mowers allow mowing close to shrubs and building for faster yard maintenance. Either side may be used for close trimming, which is a feature that is not available on side discharge systems. The rear discharge gives you an advantage for eliminating grass buildup in uncut areas; it also reduces blade wear and fuel costs. The medium lift blades lift the grass and cut it cleanly. It then discharges the cut grass evenly to the rear of the mower path.

The full width discharge throat provides an almost unobstructed flow of cut material. The chain guard allows the grass to be safely and smoothly discharged while providing protection from objects being thrown. This 3-point mower has 4 caster gauge wheels that adjust the cutting height and allow the deck to float with the ground contour.

The solid rubber flotation tires are not affected by punctures or tire pressure loss, ensuring an even cut every time. The finishing mower has 2 belts driving 3 blades. Belts are automatically tensions and hubs have easy access grease point for easy service. The mower has category 1 hitch pins installed.

A quick coupler PTO drive shaft is included. The recommended tractor HP for these mowers is 15 - 45. Floating3-pt systems allow mower to closely follow ground contours resulting in a quality cut.

This full length rear discharge finish (grooming) mower is designed for homeowners, camps, parks or anyone that needs to maintain lawn & turf surfaces. The open rear discharge cutting deck provides quality cut and clipping distribution when grass is cut on a frequent basis and ground conditions are not wet. Blade spindles and hubs are heavy duty cast iron and greaseable.

Rear damper system to prevent piling and clumps. Heavy duty all steel reinforced deck (frame-over-deck design). Turf friendly 3" x 8" Solid rubber wheels with a greaseable hubs.

Top access to grease points. Easy access belt tensioning system. Medium lift heat treated alloy steel blades. 1/4 thick tubular steel wheel arms for increased strength. Comes with standard 1-3/8 6-Spline PTO shaft with shear bolt.

3Pt Hitch Type: Cat I. Blade - Qty - Size & Lift type: 3 qty - 20 Hardened Steel - Medium Lift. Blade Tip Speed: 17,985 FPM. Cutting Height: 1" - 3". Roller Bearing Blade Spindle: 2 3/4" Housing w/ 1 1/4" Spindle.

Caster Gauge Wheels: 3" x 8". Caster Wheel Spindle Size/Type: Sealed Bearing with 1 Spindle.

Belt System: Tensioned Belt Drive System. PTO - Driveline Type: Series 4, 1 3/8 6-Spline w/ Shear Bolt.

Will attach to the following Tractor Brands with Cat. John Deere, Kubota, Massey Ferguson, Ford, New Holland, International, Jinma, Yanmar, Mahindra, Montana, Branson, Case, Cub Cadet, Farm Pro, Farmall, Foton, Iseki, Kioti, Mitsubishi, Nortrac, Rhino, SAME, Satoh, TYM, Tytan, Zetor. Local pick-up available at our location on weekends by appointment only.

Use at address that is not yours, is considered commercial use. Consumable, Expendable, Wear Items Examples:Rubber & plastic parts, hydraulic hoses, belts, tires, cables, blades, tines, wedges, teeth, tips, chains, pins, brushes, filters, etc. Assumes no responsibility for labor. PERMISSIBLE BY APPLICABLE LAW, BETST, LLC. THE FOREGOING EXCLUSIONS OF IMPLIED WARRANTIES DO NOT APPLY TO THE EXTENT PROHIBITED BY LAW.

PLEASE REFER TO YOUR LOCAL LAWS FOR ANY SUCH PROHIBITIONS THERE SHALL BE NO LIABILITY FOR PRODUCT LIABILITY OR LIABILITY ON THE PART OF BETST, LLC. Or any authorized agent liable for injury or damages of any kind or nature, direct, consequential, or contingent, to person or property. The sole and only remedy in regard to any defective products shall be the repair or replacement thereof as herein provided. Agent(s) of Betst, llc. Shall not be liable for any consequential, special, incidental or punitive damages resulting from or caused by any such defects.

Consumable, Expendable, Wear Items Examples: Rubber & plastic parts, hydraulic hoses, belts, tires, cables, blades, tines, wedges, teeth, tips, chains, pins, brushes, filters, etc. Assumes no responsibility for outside labor.