Mower Spindle Compatible with Woods 23903 28897 3761 3763 Models RM500 RM29

Mower Spindle Compatible with Woods 23903 28897 3761 3763 Models RM500 RM29
Mower Spindle Compatible with Woods 23903 28897 3761 3763 Models RM500 RM29
Mower Spindle Compatible with Woods 23903 28897 3761 3763 Models RM500 RM29
Mower Spindle Compatible with Woods 23903 28897 3761 3763 Models RM500 RM29

Mower Spindle Compatible with Woods 23903 28897 3761 3763 Models RM500 RM29

FLIP 706201 - Finish Mower Blade Spindle for Woods 23903. FLIP 706201 is an aftermarket Woods finish-mower blade spindle assembly replacing 23903 and the listed cross-references. Start with the exact mower model and serial number, then compare the original spindle's mounting, pulley and blade connections.

One spindle assembly, as pictured. Check which pulley, blade fastener and related hardware your exact mower uses before transferring parts from the original assembly.

Match the exact mower model, serial range and original spindle reference, then compare mounting, pulley and blade connections. For RM59-3, retain the listed serial restriction of 75000 and up. A Woods or RM-series name alone does not confirm fit. Compare the replacement with the original before installation and transfer only serviceable, compatible components. Match the blade fastener's thread and turning direction to the exact spindle and service instructions; start it by hand and stop if it binds.

Do not modify the spindle or deck to compensate for a mismatch. Follow the correct mower instructions for assembly and tightening. Listed model references: RM500, RM500-2, RM59-1, RM59-2, RM59-3, RM59CO-1, RM59CO-S-1, RM59K-1, RM59K-E, RM59LB-1, RM59SB-1, RM550, RM600, RM600-2. Replacement references: 23903, 28897, 3761, 3763, 62073, 65111. Detailed model and serial application notes. Fits: RM500 Rearmount Finish Mower (4/90) RM500-2 Rearmount Finish Mower RM500-2 Rearmount Finish Mower (4/90) RM59-1 Rearmount Finish Mower RM59-2 Rearmount Finish Mower RM59-3 S/N 75000 & Up Rearmount Finish Mower RM59CO-1 Rearmount Finish Mower RM59CO-S-1 Rearmount Finish Mower RM59K-1 Rearmount Finish Mower RM59K-E Rearmount Finish Mower RM59LB-1 Rearmount Finish Mower (9/82) RM59SB-1 Rearmount Finish Mower. Questions before ordering and installation. Does every Woods RM-series mower use this spindle?

Match the exact mower model and serial number, original spindle reference and mounting/pulley/blade connections. Use the spindle diagram for that mower rather than the family name alone.

Is there a serial restriction for RM59-3? The existing application note lists RM59-3 serial number 75000 and up. Match the original spindle reference and diagram as well.

Can I reuse my original pulley and blade hardware? Only after confirming the parts match this spindle and are serviceable. Compare the pulley and blade mounting arrangements, fastener thread and required washers with the exact mower's parts diagram. What if the blade fastener binds? Confirm the correct fastener, thread and turning direction for the exact assembly using the service instructions. Start compatible fasteners by hand and do not force them. What is included with FLIP 706201?

Check the product photos and exact mower diagram for the pulley, blade fastener and other parts you plan to transfer.


Mower Spindle Compatible with Woods 23903 28897 3761 3763 Models RM500 RM29


Finish Mower Blades   Links   Contact Us   Privacy Policies   Terms of service